EN

Seven Steps of Turnstile Gates Installation Nov 07, 2018

Seven Steps of Turnstile Gates Installation

1. Determine the position: determine the installation position of the intelligent turnstile gate.

2. Wiring: specify wiring of strong current and weak current power supply as well as the communication line.

3. Placement: Place the gate to the intended installation position.

4. Punching: draw a fixing hole, fixed with expansion screws.

5. Connecting: After fixing the gate, connect all the wires to get ready.

6. Power-on: debugging intelligent turnstile gates (this mainly applied to the swing turnstile gate, flap turnstile gate), the swing door should be kept parallel, alarm test; Swing & flap turnstile gates to determine the door wing switch position, alarm test; Sliding door should make sure that the door is placed up and down.

7. Authorization data: Authorized card or fingerprint, etc.