EN

Main Classification and Advantages of Turnstile Nov 25, 2019

Swing turnstile

Swing turnstile is generally called slap turnstile in the rail transit industry. Its arresting body (swing turnstile) has a certain area of plane, which is perpendicular to the ground. It can achieve arresting and release by rotating swing. The materials of the arresting body are usually stainless steel, plexiglass and toughened glass, and some of them are wrapped with special flexible materials (to reduce the damage to pedestrians). From the movement control mode, it can be divided into mechanical type and full-automatic type. In terms of form, it can be divided into vertical, bridge and cylinder types. The vertical and cylinder types are small in volume and easy to install, but the length of the channel is short and the function of pedestrian detection module is limited; the bridge turnstile swing channel is long, the function of pedestrian detection module is strong and the security is higher.

Advantages of Swing Turnstile

1. The width of the passage is the largest among all the brakes, generally between 550mm and 1000mm. Some high-end products can be 1500mm, which is more suitable for pedestrians or bicycles carrying luggage and parcels, and can also be used as a special passage for the disabled.

2.Compared with the three roller gate, the bridge swing gate adds the pedestrian traffic detection module, which can effectively detect the traffic target and has strong anti tailing ability.

3. The plasticity of the appearance is the strongest among all the brakes. The materials of the arresting body are rich, and the shape of the box body is diversified, which is easy to design a very beautiful shape. Therefore, it is often used in high-end occasions such as office buildings, intelligent buildings, clubs, etc.

4. There is no mechanical collision during the operation of the gate swing, and the noise is relatively small.

Application of Swing Turnstile

Swing turnstile is suitable for the occasions with large requirements for the width of the passage, including the occasions with more pedestrians or bicycles carrying luggage and parcels, as well as the special passage for the disabled. It is also suitable for occasions with high requirements for aesthetics.

Flap turnstile

Flap turnstile, commonly known as scissor gate in the rail transit industry, is also known as quick pass gate in many foreign places. Its arresting body (gate wing) is generally fan-shaped plane, perpendicular to the ground, through expansion to achieve arresting and release. The materials of the arresting body are usually plexiglass and toughened glass, and some of them are wrapped with special flexible materials (to reduce the damage to pedestrians).

The movement control mode is only fully automatic. The form is only bridge type, and the function of pedestrian detection module is strong.

Advantages of Flap Turnstile

1. The traffic speed is the fastest of all gates.
2. The channel width is between three roller gate and swing gate, generally between 550mm and 900mm.
3. The appearance is beautiful, and the material of the gate wing is rich.
4. In case of emergency, the gate wing will quickly retract into the box, which can easily form an accessible passage, improve the traffic speed and facilitate the evacuation of pedestrians.

Application of Flap Turnstile

It is suitable for indoor occasions with large flow of people, such as the ticket office of subway and railway station. It is also suitable for occasions with high requirements for aesthetics.

Gate Turnstile

The turnstile, also called the gate turnstile, is developed from the three roller turnstile, drawing on the characteristics of the turnstile (the biggest difference is that the arresting body is not a glass door, but a metal fence). According to the different height of the arresting body, it can be divided into full height turnstile (also called full height turnstile or full height turnstile) and half height turnstile (also called half height turnstile). There are many applications of full height turnstile.

The arresting body (gate rod) is generally composed of three or four metal rods, which are parallel to the horizontal plane in the shape of "Ya" (also called three-bar turnstile) or "ten" (also called cross gate or cross turnstile).

From the movement control mode, it can be divided into mechanical, semi-automatic and full-automatic. From the number of channels, it can be divided into single channel, double channel, three channel, four channel and so on.

Advantages of Gate Turnstile

1. The security of full height turnstiles is the highest among all turnstiles, and the only one among all turnstiles can be unattended.
2. It is very effective to realize single person passing, that is, only one person can pass at a time, with high security and reliability.
3. Strong waterproof and dustproof ability, strong adaptability to the environment, suitable for outdoor and indoor.

Application of Gate Turnstile

Full high turnstiles are suitable for unattended and high security situations, as well as some outdoor situations with poor environment.
Half high turnstiles are suitable for occasions with high requirements for traffic order, such as gymnasiums, prisons, etc.

Three Roller Gates

Three roller gate is also called three rod gate, three rod gate, three roller gate, roller gate and roller gate. The arresting body (gate rod) is composed of three metal rods, which form a spatial triangle. Generally, the hollow closed stainless steel pipe is used, which is firm and not easy to deform. The arresting and release are realized by rotation.

Three roller gate is the earliest type of gate, and it is also the most mature and perfect one, but it is gradually replaced by the following swing gate and wing gate.

From the movement control mode, it can be divided into mechanical, semi-automatic and full-automatic. It can be divided into vertical and bridge type. The volume of vertical three roller gate is small and easy to install; the channel of bridge three roller gate is long and the security is higher.

Advantages of Three Roller Gates

1. It is very effective to realize single person passing, that is, only one person can pass at a time, with high security and reliability.
2. Low cost.
3. Strong waterproof and dustproof ability, strong adaptability to the environment, suitable for outdoor and indoor.

Application of Three Roller Gates

It is suitable for ordinary pedestrians and places where the flow of people is not large or pedestrians do not take good care of it when using, and some outdoor places where the environment is relatively bad.